Control cables transmit loads and control positions over long distances and must operate reliably over repeated cycles over long periods of time. Control cables are flexible and a lot of friction occurs between the outer sheath and the inner cable, but this can be minimized by using the right lubricant.
C・K-LUBE JB-18 greases have a wide operating temperature range and good adhesion. Synthetic and silicone oil-based lubricants are often used for this application.
Features and Benefits:
●Excellent high and low temperature performance;
●Low volatility, not easy to oxidize,suitable for long-term lubrication;
●Non corrosive to metals, compatible with most plastics and elastomers, etc.
Primary Application:
●Auto control cable;
●Plastic/plastic, plastic/metal gear sets for low and medium speed operation;
●Medium to heavy load plastic/plastic,plastic/metal friction pairs.
Typical Properties:
Properties | Parameter | Typical Value |
Test Method |
|
Color & appearance | White uniform ointment |
White uniform ointment |
-- | |
Recommended service range | -- | -40~250 | -- | |
Penetration 0.1mm | 305~325 | 317 | GB/T 269 | |
NLGI grade | 1 | 1 | -- | |
Drop point ℃ | ≥250 | >330 | GB/T 3498 | |
Oil separation(100℃ 30h) % | ≤5.0 | 2.65 | GB/T 0324 | |
Evaporation (150℃ 1h) % | ≤3.0 | 0.52 | SH/T 0337 | |
Corrosion(T3 copper 100℃ 3h) | PASS | PASS | SH/T 0331 | |
Corrosion(45#steel 100℃ 3h) | -- | PASS | SH/T 0331 | |
Low temperature torque (-40℃) mN·m |
Start-up |
-- -- |
110 |
SH/T 0338 |
Oxidation resistance(99℃ 100h)kPa | -- | 25 | SH/T 0325 |
(The above data are for reference only, not contractual.)
parking
1kg
16kg can